Forney UniFlame Manuel d'utilisateur télécharger pdf (Page 2)

Forney Corporation

3405 Wiley Post Road

Carrollton, TX 75006 USA

Tel: 972.458.6100

Fax: 972.458.6650

www.forneycorp.com

TECHNICAL BULLETIN

PUBLICATION

#404005-08 REV 03/05

UNIFLAME - UNITIZED FLAME DETECTOR

FLAME DETECTORS

PRODUCTS AND ACCESSORIES

UNIFLAME SOLID STATE IR Part #401111-01

UNIFLAME SOLID STATE UV Part #401112-01

UNIFLAME DUAL SPECTRUM Part #401113-01

MECHANICAL:

Housing Material: Die-cast aluminum with silver polyester powdercoat finish

Weight: 3.8 lbs (1.73 kg)

Environmental: NEMA 4X, IP66

Mounting: 1" NPT female pipe mount secured with

locking collar (fiber optics available on IR & UV models)

Cooling Air: Clean, dry, cool; 10 SCFM (17 Nm 3 /hr)

6" w.c. (4.95 mbar) above furnace pressure

Temperature Rating: -40°F to +150°F (-40°C to +65°C)

Humidity: 0% to 95% relative humidity, non-condensing

ELECTRICAL:

Input Power: 24 Vdc (+10%/-15%), 0.35A

Electrical Connection: 12-pin, quarter-turn quick-disconnect

Relay Output: Flame Relay, SPST (N.O. contacts)

Fault Relay, SPST (N.C. contacts)

Contact Rating: Minimum: 10 mA @ 5 VDC

Maximum: 2A @ 240 VAC (resistive)

2A @ 30 VDC (resistive)

Analog Output: 4-20 mA DC current referenced to 24VDC, max. con-

nected load is 750 ohms.

Status Indication: Eight (8) character, alphanumeric LED Display (scrolling

capability)

Operator Interface: Four (4) pushbutton style keys

UV Sensor / Wavelength: Super Blue Silicone / 295-320nm

IR Sensor / Wavelength: Indium Gallium Arsenide (In Ga As) / 700-1700nm

1 2

Pas de commentaire

Forney UniFlame Manuel d'utilisateur Page 2